| Page 8 |
Air Cooled Method 5 Probe
Caption under picture should be APS-oI
|
| Page 13 |
GN-DGS Set:
30* O-116S should be
30* O-116V Viton® O-Ring for Grooved #28 Ball
|
| Page 36 |
Federal Reference Method 2
Input Parameters
Area of stack (m²) or (ft²) = pr² or p(D/2)²
or LxW should be
Area of stack (m²) or (ft²) = pr²
or p(D/2)² or LxW
|
| Page 47 |
Method 3 Orsat Analyzer
Individual Components
VSB2-MP should be
VSB3-OP (Labeling on picture also)
|
| Page 56 |
Tedlar® Bag Sampling Equipment for VOC's
SK-M180 VacBag Sampler System
1 TBP-102A Gas Sampling Pump Unit, Adjustable from 100-1000ccm
should be
1 TBP-102A Gas Sampling Pump Unit, Adjustable from 50-500ccm
3 TS4-03S should be
3 TS4-035
|
| Page 62 |
CEM Probe Part Identification
PCoooo should be
PCoo-oo
|
| Page 64 |
Maximum HSRL length by Circuit Breaker Size (Table)
should be
| Maximum
HSRL Length by Circuit Breaker Size |
| 10°C (50°F)
Start-up Temp |
| |
15A |
20A |
30A* |
| 120VAC |
18m (60ft) |
23m (75ft) |
35m (115ft) |
| Plug Type |
L5-15 |
L5-15 |
L5-30 |
| 240VAC |
35m (115ft) |
47m (155ft) |
|
| Plug Type |
L6-20 |
L6-20 |
|
|
| Page 73 |
Port Connectors
Tube End Reducer
8TUR10-S 5/8TU-1/2TU, SS should be
8TUR10-S 1/2TU-5/8TU, SS
|
| Page 76 |
Monorails
P1001-9 should be
P1000-9
|
| Page 77 |
Temperature
Degrees Celsius (°C) to Degrees Fahrenheit (°F)
°F = 9/5(°C + 32) should be
°F = 9/5 x °C + 32
|
| Page 79 |
Equations
Dry Gas Meter Volume
K1 = 17.45 (English Units) should
be
K1 = 17.64 (English Units)
|
|
Volume of Water Vapor
should be
|
|
Estimated Nozzle Diameter
should be
|
|
Meter Orifice Flowrate
should be
DH = KDP
|
