Equipment by Method

Apex Instruments Method Specific Kits are designed to take the guess work out of assembling all the components you need to perform method specific sampling. Method specific kits do not include your meter console or pump which must be chosen separately. Your method specific kit can then be added to these components to create an entire sampling system for any specific method. Please keep in mind that some of our method kits only consist of attachments that need to be added to other kits to convert it to a sampling kit for a different method.

MethodDescription
Isokinetic:
Method 2Determination of stack gas velocity and volumetric flow rate (Type S Pitot tube).
Method 2CDetermination of gas velocity and volumetric flow rate in small stacks or ducts (Standard Pitot tube).
Method 2DMeasurement of gas volume flow rates in small pipes and ducts.
Method 2FDetermination of stack gas velocity and volumetric flow rate with three dimensional probes.
Method 2GDetermination of stack gas velocity and volumetric flow rate with two dimensional probes.
Method 2HDetermination of stack gas velocity taking into account velocity decay near the stack wall.
Method 3Gas Analysis for the Determination of Dry Molecular Weight.
Method 4Determination of moisture content in stack gases.
Method 5Determination of particulate matter emissions from stationary sources.
Method 5GDetermination of particulate matter emissions from wood heaters. (Dilution tunnel sampling location.)
Method 5IDetermination of low level particulate matter emissions from stationary sources.
Method 7CDetermination of nitrogen oxide emissions from stationary sources (alkaline permanganate/colorimetric method).
Method 7DDetermination of nitrogen oxide emissions from stationary sources (alkaline-permanganate/ion chromatographic method).
Conditional Test Method CTM-13Determination of Sulfuric Acid Vapor or Mist and Sulfur Dioxide Emissions from Kraft Recovery Furnaces
Method 8Determination of sulfuric acid and sulfur dioxide emissions from stationary sources.
Method 11Determination of hydrogen sulfide content of fuel gas streams in petroleum refineries.
Method 17Determination of particulate matter emissions from stationary sources.
Method 23Determination of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans from stationary sources.
Method 26ADetermination of hydrogen halide and halogen emissions from stationary sources isokinetic method.
Method 27Determination of vapor tightness of gasoline delivery tank using pressure vacuum test.
Method 29Determination of metals emissions from stationary sources.
Ontario Hydro - Method ASTM D6784-02Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method).
Method 201Determination of pm10 emissions (exhaust gas recycle procedure).
Method 201ADetermination of pm10 and pm2.5 emissions from stationary sources (constant sampling rate procedure).
Method 202Dry impinger method for determining condensable particulate emissions from stationary sources.
Method 0061Determination of hexavalent chromium emissions from stationary sources.
Flow and Temperature:
Method 0040Sampling of principal organic hazardous constituents from combustion sources using Tedlar® bags.
Method 7Determination of nitrogen oxide emissions from stationary sources.
Method 6Determination of sulfur dioxide emissions from stationary sources.
Method 26Determination of Hydrogen Halide and Halogen
Method 0031Determination of Volatile Organic Compounds (SMVOC)
Method 18Determination of Gaseous Organic Compound Emissions by Gas
Mercury:
Method 30BDetermination of mercury from coal-fired combustion sources using carbon sorbent traps.
Method PS-12BSpecifications and test procedures for total vapor phase mercury continuous emission monitoring systems in stationary sources.