|
|
Gas Sampling Kits and Accessories for VersaCase
Method 6 Source Sampling Kit for VersaCase4 (SK-606)
 |
The Method 6 Source Sampling Kit for VersaCase4 (SK-606)
features our new miniature VersaCase,
glass lined probe assembly,
midget glassware set, sample
tray, nontoxic ice packs, connecting accessories
and the umbilical cable
for connection to the Model
623 source sampler console.
|
|
Click on image to view or download.
|
| SK-606 includes: |
| Qty |
Part # |
Description |
| 1 |
VSB4 |
VersaCase 4 |
| 1 |
PC-3/4 |
SS Hinged Probe Clamp
(for 3/4” OD probes) |
| 1 |
MGN-CGS |
Midget Glassware Set |
| 1 |
MGA-101 |
Outlet with TC Well &
12/5 Socket |
| 1 |
MSB-1 |
Insulated Sample Tray
with Drain Valve |
| 2 |
ICE-20 |
Ice Pack, Small |
| 1 |
MPH-36 |
36” Heated Probe Assembly,
120V |
| 3 |
MPL-36G2 |
36” Pyrex Liner (8mm)
with Glass Cup (no ball joint) |
| 1 |
VU-30 |
30 ft. VersaCase Umbilical
Cable |
| 3 |
MGA-12B5TG |
Glass Adapter, 12/5 Ball
to #15 Threads |
|
| Top of Page
Insulated Sample Tray with Drain Valve (MSB-1)
|
MSB-1
shown with Midget Glassware Set
|
The Insulated Sample Tray with Drain Valve (MSB-1)
can hold a Midget Glassware Set and two nontoxic ice packs.
The ice packs allow quicker turn around between runs. At the
end of the run simply remove the ice packs and drain the water
before purging. |
| Top of Page
Midget Glassware Set (MGN-CGS)
| Qty |
Part# |
Description |
| 3 |
MGN-1A |
Midget Impinger (plain stem) |
| 1 |
MGN-1AO |
Midget Impinger (orifice stem) |
| 3 |
MGN-2 |
Midget U-Tubes |
| 1 |
MGN-6 |
L-Connector with 12/5 Sockets |
| 10 |
BS12 |
12/5 Ball Joint Pinch Clamp
|
| Features unground 12/5 ball
joints with o-ring groove. |
Method 26 Extension Kit for VersaCase4 (SK-626)
| The Apex Instruments Method
6 and Method 26 Sampling Kits are normally used in conjunction
with the Model 623 source sampler console or one of our alternative
metering devices. The midget impingers can be used for many
different methods including NIOSH and OSHA methods. The Method
6 Sampling Kit (SK-606) can be modified for US EPA Method
26 with the addition of the SK-626 Kit. |
|
|
The Method 26 Extension Kit for VersaCase4 (SK-626) is
required for modifying the Method 6 Source Sampling Kit
(SK-606). The sample is passed through a pre-purged heated
probe and filter into dilute sulfuric acid and dilute sodium
hydroxide solutions which collect the gaseous hydrogen halides
and halogens, respectively. The filter collects particulate
matter including halide salts but is not routinely recovered
and analyzed. The separate solutions are analyzed by ion
chromatography.
|
|
Click on image to view or download.
|
| SK-626
Includes: |
| (Use in addition to
SK-606 Method 6 Kit) |
| Qty |
Part # |
Description |
| 1 |
PC-3/4E |
Extended VersaCase Probe
Clamp, Holds MFH-25CA, 120V |
| 1 |
MFH-25CA |
Heated Filter Assembly
with TFA-25B |
| 1 |
TF1165 |
TFE Filter Membrane, 25mm,
30-60 Micron, 10/pack |
| 1 |
MGN-12B4 |
Glass Adapter, #12 Ball
to 1/4” Tube, Unground |
| 3 |
MPL-36G5 |
36” Pyrex Liner, 6mm OD
(1/4”) |
| 1 |
MVH-1 |
Heater Assembly for 3-way
Glass Valve, 120V |
| 1 |
MGN-1AK |
Midget Impinger, Knockout,
Unground |
| 1 |
MGN-1A |
Midget Impinger, Plain
Stem, Unground |
| 1 |
MGN-3SB |
Midget 3-way Valve, Sockets Inlet
& Outlet, Ball Purge
|
Method 26 Accessories
|
MVH-1
shown with valve |
| Part # |
Description |
| MVH-1 |
3-way Valve
Heater, Aluminum Body with 30W Heater and TC |
| MH-30 |
Replacement
30watt/120V Heater for MVH-1 (add suffix V for 240V) |
| MGN-3SB |
Glass 3-way
Valve with 12/5 Unground Socket Joints Inlet and Outlet,
Ball Joint Purge |
| MFH-25CA |
Heated Filter
Assembly with Clamp (MFH-25C), 25mm Filter Body (TFA-25B)
and Heater (MH-50) |
| TFA-25B |
25mm TFE Filter
Replacement Body Only with 1/4” Tube Union, No Clamp |
| MH-50 |
Firerod Heater
Sub-Assembly with Power Cord and TC, 50W, 120V, for
MFH-25 Filter Clamp |
| TF1165 |
TFE Membrane,
25mm, 30-60 Micron, 10/pack |
| PC-3/4E |
Extended 3/4”
Probe Clamp (accepts MFH-25CA) |
| MGN-12B4 |
Glass Ball Adapter, Unground
12/5 Ball to 1/4” Tube Stub, O-ring |
|
MFH-25CA |
| Return to Product Index
|
| Top of Page
|
