Apex Instruments, Inc. - CEM Temperature Controllers

CEM Temperature Controllers

Apex Instruments offers a choice of one or two station Temperature Controllers in two different styles of digital display controllers and one style of analog display controller. All of our temperature controllers have a panel mounted circuit breaker and a separate solid state output relay for high output reliability. Our heavy duty controllers have a separate slow-blow 25 amp fuse that is panel mounted for easy access and are typically used with 50 to 100 foot heated sample lines. These temperature controllers can be used in Continuous Emissions Monitoring (CEM) in any application where there is a need to control temperature. The single station controller is primarily partnered with our shorter self regulating heated sample lines. The dual station controllers can be used in configurations that require control of any two heated devices such as the probe/oven combination or the probe/heated sample line.

Temperature Controller Features:

• External vertically mounted aluminum heat sinks for better heat transfer from relays
• Compact size: 8.5” x 7.25” x 6.5”
• Oversized solid state relays- 25 Amp
(45 Amp available for high output)
• Type K thermocouple input (other models available upon request)
• Standard receptacles for power output
• Alternate connectors available (i.e. 4-pin circular connectors)

Analog Display Temperature Controllers

Features:

• Dual scale dial calibrated in both °F and °C (0-800°F/0-427°C)
• LED deviation indicator shows the process temperature below, at or above set value
• The set pointer is located close to the scale so that the parallax error is held to a minimum
• 1/16 DIN controller
• Time proportioning logic

Digital Display Temperature Controllers

Features:

• Accuracy to ±0.25% of span
• Simple key operation is delivered in a “push-to-set” key action
• 1/32 DIN controller

Specify °F or °C when Ordering

Temperature Controller Options

240 Volt Operation is available for all controllers. Add “V” to end of part number. (e.g. ICS-141V)
Standard duty controllers offer an optional 4-pin circular connector for power output. Add “A” to end of part number (e.g. ICS-141A)

| Return to Product Index |

| Top of Page |