HAVE A QUESTION? CALL US!
(800) 882-3214

TEP-1610 Thermoelectric Portable Gas Chiller

TEP-1610 Thermoelectric Portable Gas Chiller

The TEP-1610 Thermoelectric Portable Gas Cooler removes water vapor from process gas samples prior to gas analysis.

The TEP-1610 is the perfect choice for your portable gas sampling system. We listened and we strive to deliver a fast response that is lightweight, portable, and rugged.

Description

Gas Sampling Equipment for Instrumental Methods:

The TEP-1610 has an aluminum block containing a single-pass stainless-steel condenser, a sample pump, a peristaltic pump for condensate removal, a coalescing filter, flow meter, and three auxiliary temperature controllers (probe, filter and heated sample line jumper). The rugged and lightweight design allows the chiller to be used on the sampling platform, close to the source.

TEP-400 Thermoelectric Gas Cooler shown in our 10U transport case.
TEP-1610 Thermoelectric Gas Cooler shown in our 10U transport case.

The recommended system would include a heated probe and filter, a heated sample line, and a gas cooler.

  • Heated sample line – HSLB--
  • Heated filter assembly – SFA-2564
  • IRM probe – PC-
  • Pre-filter – SFC-2590

TEP-1610 Cooler features:

  • Portable, compact, and lightweight
  • Rugged solid-state thermoelectric module
  • OLED display with power monitor
  • Digital temperature controllers for probe, oven, and line
  • IP-rated switching power supply
  • Variable DC voltage PID controller for thermoelectric module
  • Internal sample pump
  • Peristaltic pump with a rotameter

TEP-1610 Cooler capacity chart:

 

Specifications:

Refrigeration: thermoelectric heat pump: two 50-watt solid-state modules

Temperature display: LED display +/- 0.1 °C/°F

Temperature control: three voltage modulation PID controllers, 3-button keypad

Cooling capacity: 200 BTU per hour

Cold block: insulated aluminum

Condenser: stainless steel, reverse flow condensate separator: alloy 316 stainless steel, various coatings available, 1-inch outer diameter, 10-inch length

Condensate removal: integrated peristaltic pump, 10 mL/min

Radiator: two low-profile heatsinks with six 6-mm diameter U-tube heat-pipes, coated fins for corrosion resistance, 120-mm axial fans, with encapsulated motor and electronics

Rated flow rate: 10 LPM at 10% moisture

Ambient operating temperature: 32 to 104°F (0 to 40ºC)

Auxiliary temperature controllers: digital temperature controllers for probe, oven, and heated jumper; type-K thermocouple input

Sample pump: KNF 828 diaphragm pump

Power: Supply 120 VAC at 60 Hz, 15 amps max. or 240 VAC at 50 Hz, 10 amps max., IEC C-13 inlet

Dimensions: 12.75 in x 19 in x 10.5 in (32.4 cm x 48.3 cm x 26.7 cm)

Weight: 25 lbs (11.4 kg)

Pinnacle Cooling Technology

We chose the Phononic thermoelectric modules because we believe that they offer the most advanced and innovative thermoelectric modules on the market.
We chose the Phononic thermoelectric modules because we believe that they offer the most advanced and innovative thermoelectric modules on the market.

Water vapor is removed by cooling the sample gas to a constant dew point with the Apex Pinnacle Heat pump. The Pinnacle assembly in the TEP-1610 utilizes two thermoelectric modules, which operate on the Peltier effect.

The Pinnacle heat pump is housed in a rugged package that is easy to service and designed to withstand harsh environments.

Stainless Steel Condenser

SC-1610 Stainless Steel Condenser Assembly and Airflow Diagram
SC-1610 Stainless Steel Condenser Assembly and Airflow Diagram

The condenser is fabricated from 316 stainless steel and can be treated with a variety of coatings: silicon, polyfluorinated, silane; polar or non-polar. The micro annular flow channel provides maximum condensation efficiency with minimum contact time. The single condenser setup improves response time.

Pinnacle Cooling Unit

The Pinnacle heat pump unit includes a highly conductive aluminum block fitted with two rugged thermoelectric modules, a stainless-steel condenser, a high-efficiency heat exchanger, exhaust fan, and a PID temperature controller.

The heat pump uses an extremely reliable rugged solid-state thermoelectric module (TEC) and a low-resistance heat exchanger with a copper base and heat pipes with high thermal conductivity for removing heat from the hot side of the TEC and dispersing the heat to the surrounding environment via the exhaust fan.

Pinnacle Heat Pump Assembly for TEP-400 and AC-1610 Thermoelectric Gas Coolers
Pinnacle Heat Pump Assembly for TEP-1610 Thermoelectric Gas Cooler

You may also like…