HAVE A QUESTION? CALL US!
(800) 882-3214

Transport Cases

Transport Cases

ATA Transport Cases | SKB Transport Cases

Clear
SKU: T-CASES Category:

Description

ATA Transport Cases:

ATA Transport Cases protect your equipment and glassware from shipping damage. Each case is made of sturdy 3/8-inch ABS laminated plywood with reinforced edges and corners. A built-in foam liner provides added protection. Call for details on custom cases.

Part #Description
TC-XC5Console transport case XC-500 series consoles
TC-GW2.5Glassware transport case (holds 2-1/2 sets of Method 5 glassware) 
TC-7A9Method 7 kit transport case
TC-GW20IATA glassware transport case (holds 20 impingers)
TC-PITOTBlow-molded case with convoluted foam, locking metal latches
TC-SB13Sample case transport case (holds one SB-2 and two SB-3 units)
TC-VSBVersaCase transport case (holds any VersaCase2 kit)
TC-X0523XC pump unit transport case
TC-GW-FGlassware transport case for filter holders, u-tubes, clamps 18.5 x 14 x 22.25 inches, includes foam inserts

SKB Transport Cases:

Apex Instruments now offers multiple black, plastic, stackable SKB RotoRack cases to protect your equipment from damage. Constructed of a roto-molded linear low-density polyethylene (LLDPE/LMDE) shell which includes front and rear covers and gasket seals to protect the contents from moisture and dirt. This case offers recessed heavy-duty twist latches, molded-in handles, and shock absorbing rubber feet. (optional rear rails available for added stability).

All SKB Cases must be shipped in a box if shipping UPS or FedEx to reduce damage.

Part #Description
XC-5UBlack roto-molded linear low-density polyethylene (LLDPE/LMDE) case shallow 19-inch, 5 unit, inside: 19 x 8 x 8.75 inches (HxWxD)
XC-6UBlack roto-molded linear low-density polyethylene (LLDPE/LMDE) rack case 19-inch, 6 unit, black polyethylene
XC-8UBlack roto-molded linear low-density polyethylene (LLDPE/LMDE) case, 19-inch, HxWxD: 18 x 22 x 20 inches (45.7 x 55.9 x 50.8 cm)
XC-10UBlack roto-molded linear low-density polyethylene (LLDPE/LMDE) case, 19-inch, inside dimensions 19 x 17.5 x 8 inches, UHMW
XC-10UDBlack roto-molded linear low-density polyethylene (LLDPE/LMDE) case, 19-inch deep, inside dimensions 19 x 17.5 x 17 inches, UHMW. (accepts Stirling rackmount gas conditioner; accepts GSB-1000SCA bottles)
XC-16USASKB ShockMount rack case assembly