Videos

New Products

XD-502 – Digital Source Sampling Console

Exciting features of the XD-502 include an internal sampling pump, a sun-or-shade readable display, and optional software designed specifically for this console.

Stack Testing Education

Intro to Isokinetic Sampling

In this video you’ll see an Intro to Isokinetic Sampling, our contribution to the industry, and what we can do for you.

Method 5 Sampling Train Breakdown

Breakdown of the Method 5 Sampling Train and details about each component.

Intro to Method 2 and Flow Measurement

In this video you’ll learn about US EPA Method 2, the challenges involved in performing Method 2, and our available systems for Method 2, 2F, and 2G.

New Series: How To Videos

XD-502 – Timer Auto-Stop

Apex Instruments technician Joe Thompson provides a tutorial on how to access and use the timer auto-stop function on the XD-502 console.

XD-502 – Markers & Notes

XD-502 – Software & FirmwareApex Instruments technician Joe Thompson provides a tutorial on how to access and use the markers and notes menu on the XD-502 console.

XD-502 – Software and Firmware

Apex Instruments technician Joe Thompson provides an overview on how to find, download, install, and use the provided software and firmware for the XD-502 console.

XD-502 – Zero Sensors

Apex Instruments technician Joe Thompson provides a tutorial on how to zero the pressure transducers for your deltaH and deltaP on the XD-502 console.

XD-502 – Coarse vs Fine Valve

Apex Instruments technician Joe Thompson provides an understanding of the differences between a coarse valve and a fine valve on a Method 5 metering console (XD-502 is shown here). Joe also mentions how each is used.

XD-502 – Changing Units

Apex Instruments technician Joe Thompson provides a tutorial on how to access the menu to change the units on your XD-502 console and provided software.

XD-502 – Connecting To Software

Apex Instruments technician Joe Thompson provides a tutorial on how to connect the XD-502 console to the provided software.

XD-502 – Damping

Apex Instruments technician Joe Thompson provides an understanding and a tutorial on how to change damping settings for the pressure transducers inside of the XD-502 console, what these values mean, and how to determine what your damping settings should be.

XD-502 – Export Data

Apex Instruments technician Joe Thompson provides a tutorial on how to export data on the XD-502 console using the provided software. Joe also shows what data is exported and what the default spreadsheet looks like.

XD-502 – Faceplate Components

Apex Instruments technician Joe Thompson provides an overview of the components on the faceplate of the XD-502 console.

XD-502 – How the Aux Switch Works

Apex Instruments technician Joe Thompson provides a tutorial on how to use the XD-502 auxiliary switch on the console and what this switch controls.

XD-502 – Job Information

Apex Instruments technician Joe Thompson provides a tutorial on how to access and use the XD-502 job information tab using the provided software.

XD-502 – Leak Test Menu

Apex Instruments technician Joe Thompson provides a tutorial on how to access and use the XD-502 leak test menu using the firmware.

XD-502 – Backside Leak Check

Apex Instruments technician Joe Thompson provides a tutorial on how to perform a backside leak check on the XD-502 console.

XD-502 – Calibrations Menu

Apex Instruments technician Joe Thompson provides a tutorial on how to access and use the XD-502 calibrations menu in the provided software.

Additional How To Videos

Fuji Temperature Controller – How to Program

How to use and program a Fuju temperature controller.

How to Audit a Transducer

In this video we show you how to perform a calibration check (Audit) on a transducer that is connected to a Red Lion Process Meter following EPA Method 2 Procedures (an procedure that applies to many isokinetic methods such as Methods 5, 17, 23, 26A, 29, 201A and 202).